If you’re looking to Sell Fluke Networks CIQ-KIT Precision Infrared IR Thermometer

At a Glance

Qualifies – Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
Troubleshoots – shows why existing cabling cannot support the network’s bandwidth requirement (e.g. crosstalk at 11 meters)
Discovers – detects what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
Identifies unused switch ports that can be reallocated
Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
Tests all copper cabling media: twisted-pair, coax, and audio cabling

Product Capabilities

The network tech’s vision into cabling bandwidth
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

Reduce escalated problems by as much as 30%
CableIQ’s powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Coax cable testing
Now there’s a multifunctional tester for all home cabling media. With the prominence of coax in the home, you need a tool that can quickly and easily test quality of coax cabling, and verify whether video outlets are live or not. The CableIQ™ Qualification Tester gives you several ways to test coax cabling.

Intelligent wiremap
The CableIQ™ Tester’s “intelligent wiremap” feature tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located. Unlike other testers that just show a series of numbers for a wiremap, the unit displays an easy-to-read graph with distance to faults proportional to the cable length. It also identifies breaks and shorts by pin, rather than by pair. This dramatically reduces the time to locate and troubleshoot a poorly terminated jack, or a break in the middle of a cable.

Telephone wire test
CableIQ tester’s “multi-map” is a breakthrough feature for residential cable testing. Smart cable identifiers give the unique ability to wiremap star wiring configurations often found in residential voice systems. Wiremap faults and ID number (up to seven) of any jack can be seen from the main unit, all at once.

Buying, Selling, Trading Fluke Networks CIQ-KIT

IntelliTone Pro 200 Probe

Main Features

IntelliTone 200 Probe locates and isolates hidden or bundled voice data and video cables quickly and reliably even on active networks

Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliTone™ Probe’s signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes’ work.

If you’re selling your Fluke Networks CIQ-KIT please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks Intellitone 100 Probe & Toner Kit

Fluke Networks IntelliTone 100 Toner & Probe Kit MT-8200-50A

Get advanced SuperVision for locating cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro Toner and Probe Kits find the cables others can’t.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

Locate cables quickly and easily
Fluke Networks has applied decades of cable test engineering expertise to the science of locating copper cables. The result is what we call IntelliTone technology – a digital signal-toning and signal-interpreting process that rapidly zeroes in on cables.

Verify conductor continuity with cablemap
Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone™ Pro. The IntelliTone Pro 200 Probe features a Cablemap capability that identifies common cable miswires in twisted pair cabling. IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires.

Buying, Selling, Trading Fluke Networks Intellitone

Features:

Eliminates confusion over cable location; decisively rejects noise and false signals
Locates the correct cable bundle
Isolates a cable within the bundle, despite cable bleed
Verifies twisted-pair installation with visual end-to-end continuity test (opens, shorts and reversed pairs)
Identifies individual wire pairs with new SmartTone™ analog toning
Simplifies signal interpretation in noisy environments with multiple LED indicators

If you’re selling your Fluke Networks Intellitone please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks CIQ-GSV2 CableIQ Test Service Kit

CableIQ Qualification Tester

>At a Glance

>Qualifies – Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
>Troubleshoots – shows why existing cabling cannot support the network’s bandwidth requirement (e.g. crosstalk at 11 meters)
>Discovers – detects what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
>Identifies unused switch ports that can be reallocated
>Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
>Tests all copper cabling media: twisted-pair, coax, and audio cabling

>Product Capabilities

>The network tech’s vision into cabling bandwidth >
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
>Reduce escalated problems by as much as 30%
CableIQ’s powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

LinkRunner AT 1000 Network Tester

The Fluke Networks LinkRunner AT 1000 Network Auto-Tester is designed to identify and solve network connectivity problems in seconds. User defined Auto-Test provides connection verification at 10/100/1G over copper, offers cable verification, location of the nearest VLAN & switch model and much more. LinkRunner AT is IPv4 ready and will store up to 10 reports.

Buying, Selling, Trading Fluke Networks CIQ-GSV2

>IntelliTone Pro 200 Probe

>Main Features

>IntelliTone 200 Probe locates and isolates hidden or bundled voice >data and video cables quickly and reliably >even on active networks

>Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles >The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliTone™ Probe’s signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes’ work.

IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.

If you’re selling your Fluke Networks CIQ-GSV2 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks CIQ-GSV2 CableIQ Test Service Kit

CableIQ Qualification Tester

>At a Glance

>Qualifies – Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
>Troubleshoots – shows why existing cabling cannot support the network’s bandwidth requirement (e.g. crosstalk at 11 meters)
>Discovers – detects what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
>Identifies unused switch ports that can be reallocated
>Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
>Tests all copper cabling media: twisted-pair, coax, and audio cabling

>Product Capabilities

>The network tech’s vision into cabling bandwidth >
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
>Reduce escalated problems by as much as 30%
CableIQ’s powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Buying, Selling, Trading Fluke Networks CIQ-GSV2

LinkRunner AT 1000 Network Tester

The Fluke Networks LinkRunner AT 1000 Network Auto-Tester is designed to identify and solve network connectivity problems in seconds. User defined Auto-Test provides connection verification at 10/100/1G over copper, offers cable verification, location of the nearest VLAN & switch model and much more. LinkRunner AT is IPv4 ready and will store up to 10 reports.

>IntelliTone Pro 200 Probe

>Main Features

>IntelliTone 200 Probe locates and isolates hidden or bundled voice >data and video cables quickly and reliably >even on active networks

>Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles >The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliTone™ Probe’s signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes’ work.

IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.

If you’re selling your Fluke Networks CIQ-GSV2 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks CIQ-GSV CableIQ GB Test Service Kit

CableIQ Qualification Tester

>At a Glance

>Qualifies – Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
>Troubleshoots – shows why existing cabling cannot support the network’s bandwidth requirement (e.g. crosstalk at 11 meters)
>Discovers – detects what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
>Identifies unused switch ports that can be reallocated
>Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
>Tests all copper cabling media: twisted-pair, coax, and audio cabling

>Product Capabilities

>The network tech’s vision into cabling bandwidth >
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
>Reduce escalated problems by as much as 30%
CableIQ’s powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Buying, Selling, Trading Fluke Networks CIQ-GSV

LinkRunner Pro

At a Glance :

Link : Determine whether the drop is active, identify its speed, duplex capabilities and service type-10/100/1000 Mbps.
Ping : Verify connectivity to key devices.
Cable verification : Multiple tests help you quickly determine if cable is the problem.
Cable identification : Document unmarked segments, saving you hours of troubleshooting time.
Improved efficiency : Speed up the escalation process by identifying physical or link layer problems.

Product Capabilities :

An essential, personal tool to quickly verify network connectivity and availability.
As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window.
As a result, nearly 80% of network problems stem from simple wiring and connection problems.
Front-line technicians are the first line of defense against problems in the physical and link layers of the network.
LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.

>IntelliTone Pro 200 Probe

>Main Features

>IntelliTone 200 Probe locates and isolates hidden or bundled voice >data and video cables quickly and reliably >even on active networks

>Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles >The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliTone™ Probe’s signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes’ work.

IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.

If you’re selling your Fluke Networks CIQ-GSV please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks CableIQ Intellitone Pro 20Fluke Networks CableIQ Qualification Tester

At a Glance

• Qualifies – Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
• Troubleshoots – shows why existing cabling cannot support the network’s bandwidth requirement (e.g. crosstalk at 11 meters)
• Discovers – detects what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
• Identifies unused switch ports that can be reallocated
• Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
• Tests all copper cabling media: twisted-pair, coax, and audio cabling

Product Capabilities

The network tech’s vision into cabling bandwidth
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

Reduce escalated problems by as much as 30%
CableIQ’s powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Coax cable testing
Now there’s a multifunctional tester for all home cabling media. With the prominence of coax in the home, you need a tool that can quickly and easily test quality of coax cabling, and verify whether video outlets are live or not. The CableIQ™ Qualification Tester gives you several ways to test coax cabling.

Intelligent wiremap
The CableIQ™ Tester’s “intelligent wiremap” feature tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located. Unlike other testers that just show a series of numbers for a wiremap, the unit displays an easy-to-read graph with distance to faults proportional to the cable length. It also identifies breaks and shorts by pin, rather than by pair. This dramatically reduces the time to locate and troubleshoot a poorly terminated jack, or a break in the middle of a cable.

Telephone wire test
CableIQ tester’s “multi-map” is a breakthrough feature for residential cable testing. Smart cable identifiers give the unique ability to wiremap star wiring configurations often found in residential voice systems. Wiremap faults and ID number (up to seven) of any jack can be seen from the main unit, all at once.

Buying, Selling, Trading Fluke Networks CableIQ

IntelliTone Pro 200 Probe

Main Features

• IntelliTone 200 Probe locates and isolates hidden or bundled voice data and video cables quickly and reliably even on active networks

Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliTone™ Probe’s signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes’ work.
If you’re selling your Fluke Networks CableIQ please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks Intellitone 200 TonerThermometer

Fluke Networks Intellitone 200 Toner

Tone on live networks quickly and safely
Modern network devices use common mode termination for cables connected to their ports. This reduces noise and cross talk in the cable but this can also absorb an analog toner signal. Unlike analog signals, the IntelliTone digital signal stays strong despite common mode termination. And the IntelliTone Toner automates toning individual cable conductors, making it quick, efficient and safe to locate cables on active networks.

Identify and troubleshoot cable services
Is the RJ45 jack a datacom jack, a phone jack – or a dead jack? IntelliTone 200 Toner LEDs clearly identify common datacom and telecom services found on today’s networks including 10/100/Gigabit Ethernet links. LEDs clearly identify common services found on today’s networks, including telcom and datacom services and 10/100/1Gb Ethernet links.

Telecom troubleshooting
Detect Line 1 voltage, polarity, and ring with IntelliTone 100 and 200 Toners. The IntelliTone 200 Toner adds Line 2 troubleshooting. Confirm telecom circuits with the built-in talk battery capability.

Continuity
Once you’ve located a cable, the next step is to validate cable conductor continuity. IntelliTone 100 and 200 Series Toners make it easy – eliminating the need for a separate diagnostic tool.

Buying, Selling, Trading Fluke Networks Intellitone

If you’re selling your Fluke Networks Intellitone please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks CIQ-KIT Advanced IT Kit
Fluke Networks Intellitone 200 Toner

Tone on live networks quickly and safely
Modern network devices use common mode termination for cables connected to their ports. This reduces noise and cross talk in the cable but this can also absorb an analog toner signal. Unlike analog signals, the IntelliTone digital signal stays strong despite common mode termination. And the IntelliTone Toner automates toning individual cable conductors, making it quick, efficient and safe to locate cables on active networks.

Identify and troubleshoot cable services
Is the RJ45 jack a datacom jack, a phone jack – or a dead jack? IntelliTone 200 Toner LEDs clearly identify common datacom and telecom services found on today’s networks including 10/100/Gigabit Ethernet links. LEDs clearly identify common services found on today’s networks, including telcom and datacom services and 10/100/1Gb Ethernet links.

Telecom troubleshooting
Detect Line 1 voltage, polarity, and ring with IntelliTone 100 and 200 Toners. The IntelliTone 200 Toner adds Line 2 troubleshooting. Confirm telecom circuits with the built-in talk battery capability.

Continuity
Once you’ve located a cable, the next step is to validate cable conductor continuity. IntelliTone 100 and 200 Series Toners make it easy – eliminating the need for a separate diagnostic tool.
Specifications:

Buying, Selling, Trading Fluke Networks CIQ-KIT

If you’re selling your Fluke Networks CIQ-KIT please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks CIQ-KIT Advanced IT Kit

At a Glance

• Qualifies – Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
• Troubleshoots – shows why existing cabling cannot support the network’s bandwidth requirement (e.g. crosstalk at 11 meters)
• Discovers – detects what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
• Identifies unused switch ports that can be reallocated
• Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
• Tests all copper cabling media: twisted-pair, coax, and audio cabling

Product Capabilities

The network tech’s vision into cabling bandwidth
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

Reduce escalated problems by as much as 30%
CableIQ’s powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Coax cable testing
Now there’s a multifunctional tester for all home cabling media. With the prominence of coax in the home, you need a tool that can quickly and easily test quality of coax cabling, and verify whether video outlets are live or not. The CableIQ™ Qualification Tester gives you several ways to test coax cabling.

Intelligent wiremap
The CableIQ™ Tester’s “intelligent wiremap” feature tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located. Unlike other testers that just show a series of numbers for a wiremap, the unit displays an easy-to-read graph with distance to faults proportional to the cable length. It also identifies breaks and shorts by pin, rather than by pair. This dramatically reduces the time to locate and troubleshoot a poorly terminated jack, or a break in the middle of a cable.

Telephone wire test
CableIQ tester’s “multi-map” is a breakthrough feature for residential cable testing. Smart cable identifiers give the unique ability to wiremap star wiring configurations often found in residential voice systems. Wiremap faults and ID number (up to seven) of any jack can be seen from the main unit, all at once.

Buying, Selling, Trading Fluke Networks CIQ-KIT

IntelliTone Pro 200 Probe

Main Features

• IntelliTone 200 Probe locates and isolates hidden or bundled voice data and video cables quickly and reliably even on active networks

Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliTone™ Probe’s signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes’ work.
If you’re selling your Fluke Networks CIQ-KIT please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks Intellitone100 Probe & Toner KitThermometer

Fluke Networks IntelliTone 100 Toner & Probe Kit MT-8200-50A

Get advanced SuperVision for locating cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro Toner and Probe Kits find the cables others can’t.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

Locate cables quickly and easily
Fluke Networks has applied decades of cable test engineering expertise to the science of locating copper cables. The result is what we call IntelliTone technology – a digital signal-toning and signal-interpreting process that rapidly zeroes in on cables.

Verify conductor continuity with cablemap
Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone™ Pro. The IntelliTone Pro 200 Probe features a Cablemap capability that identifies common cable miswires in twisted pair cabling. IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires.

Features:

• Eliminates confusion over cable location; decisively rejects noise and false signals
• Locates the correct cable bundle
• Isolates a cable within the bundle, despite cable bleed
• Verifies twisted-pair installation with visual end-to-end continuity test (opens, shorts and reversed pairs)
• Identifies individual wire pairs with new SmartTone™ analog toning
• Simplifies signal interpretation in noisy environments with multiple LED indicators

Buying, Selling, Trading Fluke Networks Intellitone

If you’re selling your Fluke Networks Intellitone please fill out form on the right hand side of page.