Selling Fluke NetTool We Buy New Used NetTool (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke NetTool Series II Network Tester

Email not responding? Who’s to blame? Where to start? NetTool Series II redefines how to track down and isolate the source of connectivity problems while providing the vision you need to troubleshoot network devices.

The new Series II NetTool features NetProve™ diagnostics – this easy, one-button test proves if the network is to blame for a connectivity problem. In seconds, you can test connectivity to key devices and service ports enterprise-wide.

NetTool’s inline vision provides a unique view into 10, 100 and Gigabit links to troubleshoot device problems fast. Verify compatible configurations of switches and PCs. Monitor the conversations between VoIP phones and the network. Monitor ports for suspicious traffic from spyware, malware, and viruses. Discover key devices, problems, VLANs and switch ports. Measure PoE line voltage and current and verify PoE pairs.

And if the problem is cable related, NetTool verifies wiremap, displays the distance to cabling faults, and locates cables others can’t with IntelliTone Digital Toning.

All this in a handheld, portable tool built to take what you can dish out.

 

NetTool Series II features

  • NetProve diagnostics – isolate device and application connectivity issues in seconds.
  • Inline Gigabit – troubleshoot Gigabit-tothe- desk deployments with dual 10, 100, and 1000 Mbps Ethernet interfaces.
  • PoE current measurement – view PoE current, voltage and pair information either inline or single-ended.
  • Monitoring and authentication option – identify spyware, malware, and viruses with port monitoring; troubleshoot authentication issues with 802.1X log.
  • VoIP Option – monitor IP phone boot-up and VoIP conversations and measure key call quality metrics.
  • PC to network connectivity – connect inline between two network devices and see common connectivity problems like speed and duplex mismatch, link problems, and errors.
  • PC’s network configuration – review servers the PC is configured to use, with services offered, name, IP address and subnet.
  • VLAN, CDP, EDP, LLDP visibility – see native and appliance VLANs and discovery protocol information. Inline vision between the PC or VoIP phone and network to solve application connectivity problems with the touch of a button
  • Spot available network resources – see the IP address, MAC address, subnet, and services offered by active servers, routers and printers.
  • Identify protocols on the PC and network – IP, NetWare, NetBIOS, Apple, and other protocols shown to identify mismatches and unwanted protocols.
  • Distinguish service at a network drop – determine whether a drop is offering Ethernet, phone, Token Ring, or is inactive.
  • Monitor network health – see frames sent, utilization, broadcasts, errors, and collisions – for both the desktop and network conversations.
  • Problems Log – alerts you to excessive errors, duplicate IPs, unanswered DNS queries, unwanted protocols and TCP/IP connection failures.
  • Perform basic cable tests – check patch cables or installed wiring for length, shorts, split pairs, or opens, including pin-to-pin connection.
  • IntelliToneTM Digital Signalling – quickly and safely locate cables on active networks, even when terminated at a switch.

 

Isolate device and application connectivity issues in seconds with NetProve™
Verify, isolate, and document device and connectivity problems faster than ever before with automated NetProve diagnostics. A user calls you, blaming the network, when he is unable to send an email message. Armed with a NetTool Series II, in seconds you can prove whether the network is truly at fault by seeing connectivity to key network devices and services. If the network is at fault, NetProve will isolate the source of the problem so you can fix it fast. If it is not the network, NetProve will identify which device or application port is slow to respond so you can dispatch the appropriate resource to correct the problem. This revolutionary new way to resolve connectivity issues is at least four times faster than conventional methods, resulting in improved productivity and happier users.

And NetProve improves IT staff efficiencies through improved workflow – simply create multiple catalogs representing various segments of your network. Within minutes, you can prove connectivity with up to 100 key enterprise devices and services. Do you manage remote sites? Equip less skilled personnel at remote sites with NetTools, pre-loaded with NetProve catalogs, to shift some frontline troubleshooting responsibilities to local staff.

Inline functionality reduces troubleshooting time
NetTool Series II is the only handheld troubleshooting tool with inline vision into 10, 100 and Gigabit links to see the actual traffic between the network and end devices like PCs, VoIP phones, access points and security cameras. By analyzing networkdevice conversations, you can view detailed configuration information to troubleshoot compatibility and connectivity issues. Monitor link health and network problems, discover key devices, identify active protocols, and view segment information including VLANs and switch port.

Maintain network security
Suspect malicious applications may be affecting a user’s network connection? The monitoring and authentication option allows you to identify spyware, malware, and viruses fast. Select from a list of ports used on your network and test against the expected list during troubleshooting. Unexpected traffic and ports will be displayed and flagged during the autotest.

Whether you have already deployed 802.1X or plan to soon, the monitoring and authentication option can help. For troubleshooting, monitoring and authentication can be used inline between a PC and the network to observe the client authentication process and identify failures. For deployment, your NetTool can be used to emulate a device and verify connection by loading it with your enterprise 802.1X configuration settings.

Debug VoIP phone problems
Connect inline for visibility into real-time VoIP traffic to quickly diagnose IP phone boot-up and call control problems and to measure key call quality metrics. Qualify links as being ready for VoIP during pre-deployment assessments. Monitor VoIP calls and troubleshoot VoIP problems near the edge of your network with an immediate view into call processes, avoiding the need for complicated and time-consuming packet capture and post-capture decode. Measure key VoIP metrics, including jitter and dropped packets, to quantify the quality of an IP call.

Measure PoE power
Fully characterize your Power over Ethernet (PoE) links prior to the rollout of PoE services or the installation of powered devices. Verify the PoE pairs, line voltage and current to ensure a successful deployment. Place a NetTool Series II inline between a PD and PSE to troubleshoot PoE link configuration issues.

Locate cables on active networks
IntelliTone digital signaling gives you superior vision for locating cables hidden in floors, ceilings, walls and in bundles. When paired with an IntelliTone Probe (optional), this breakthrough digital technology facilitates safe and effective cable location on active networks, even when terminated at a switch. The IntelliTone Probe clearly identifies this digital signal with audio and LED visual indicators, allowing rapid isolation of the correct cable from a bundle or on a patch panel – eliminating hours of cable confusion.

Buying, Selling, Trading Fluke NetTool

Save, send, or print reports
Generate comprehensive test reports to document network resources and PC configurations – document the network, end device, protocols, key devices, VoIP log and NetProve pass/fail results. Create baseline reports for future reference. Deliver proof that the network is operating properly or, if not, document the source of the problem for trouble ticket escalation to other groups like the server or application support team.

Minimize training time, maximize productivity
NetTool is so easy to use, even inexperienced technicians can get up to speed quickly with minimal training. And it’s priced so every technician can have one. By reducing the time and expense associated with troubleshooting PC, VoIP, device application connectivity problems, NetTool dramatically increases technician productivity.

If you’re selling your Fluke NetTool please fill out form on the right hand side of page.

Selling Fluke AirCheck We Buy New Used AirCheck (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke AirChec Duo Network Tester

AirCheck™ Wi-Fi Tester
Wireless troubleshooting made simple in a dedicated handheld tool.

  • Dedicated, handheld 802.11 a/b/g/n wireless network tester with instant-on technology
  • One-button AutoTest quickly provides a pass/fail indication of the wireless environment and identifies common problems
  • See wireless network utilization by channel and quickly determine if it is 802.11 traffic or non-802.11 interference
  • Quickly identify and locate wireless access points whether authorized or rogue
  • Fully document your troubleshooting session enabling fast trouble ticket resolution or escalation

Wi-Fi is a complex technology, but testing it doesn’t have to be. The AirCheck Wi-Fi tester allows network technicians to quickly verify and troubleshoot 802.11 a/b/g/n networks.

Designed specifically for dispatched troubleshooting, AirCheck simplifies wireless testing by providing:

  • A one-button AutoTest, which quickly provides a pass/fail indication of the wireless environment and identifies common problems – for any level of Wi-Fi technician’s expertise
  • An instant view to required test results including network availability, connectivity, utilization, security settings, rogue hunting, and interference detection
  • A rugged, purpose-built Wi-Fi tester that’s easy to use and easy to carry

Its intuitive design makes it simple for anyone to quickly master AirCheck. Instant power-up, automated testing, and quick access to more detailed information, lets you close trouble tickets faster – making technicians and users alike more productive. Easily manage test results and documentation using AirCheck Manager software. From start to finish, AirCheck helps take the guesswork out of everyday wireless troubleshooting.

Easy To Use

  • Instant-on operation – Powers up in less than three seconds and automatically starts discovering networks, access points (APs), and channel activity.
  • Get answers fast – The one-button AutoTest quickly provides a pass/fail indication of the wireless environment and identifies common problems – for any level of Wi-Fi technician’s expertise.
  • Identifies security settings for each Network and Access Point: Open, WEP, WPA, WPA2, and/or 802.1x.
  • Pinpoints Wi-Fi traffic and interference – Shows how much of each channel’s bandwidth is consumed by 802.11 traffic and interference, and the APs using each channel.
  • Finds rogue APs – Flags unauthorized APs and clients. Helps you hunt them down with the LOCATE function or find them even faster with the optional directional antenna.
  • Supports 802.11a/b/g/n All in one handheld tool.

AutoTest
Performs three essential Wi-Fi tests and a pass/fail indication of the wireless environment and identifies common problems – for any level of technician’s expertise.

  • Air Quality – Checks for Wi-Fi and non Wi-Fi utilization by channel, plus co-channel interference.
  • Network Quality – Verify coverage, interference, security and ability to connect to specified networks
  • Rogue Access Points – Identify AP’s not listed in the profile

AutoTests are user configurable and based on the multiple profiles which can be stored in AirCheck and selected for different sites or requirements. Results may also be stored for export to AirCheck Manager.


5 GHz Band*

5170-5320 MHz, 5500-5700 MHz, 5745-5825 MHz (Channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165)

*Notes:
1. AirCheck receives on all of these frequencies in every country.
2. These are the center frequencies of the channels that AirCheck supports.
Transmit Channel Frequencies2.4 GHz Band**
802.11b
2412-2484 MHz (Channel 1 to Channel 14)

802.11 g/n 20 MHz BW (HT20)
2412-2472 MHz (Channel 1 to Channel 13)

802.11n 40 MHz BW (HT40)
2422-2462 MHz (All legal bonded channel pair combinations) 

5GHz Band**
802.11 a /n 20 MHz BW (HT20)
5180-5320 MHz, 5500-5700 MHz, 5745-5825 MHz (Channels 36, 40, 44, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165)

802.11 n 40 MHz BW (HT40)
5190-5310, 5510-5670, 5755-5795 (All legal bonded channel pair combinations)

**Notes:
1. AirCheck transmits only on frequencies allowed in the country where it operates.
2. These are the center frequencies of the channels that AirCheck supports.
Regulatory DomainWorld Mode, 802.11d compliantExternal Directional Antenna FrequenciesFrequency range 2.4 GHz to 2.5 GHz and 4.9 to 5.9 GHz Minimum gain 5.0 dBi in the 2.4 GHz band and 7.0 dBi in the 5 GHz bandConnectorReverse-polarity SMA plug

Buying, Selling, Trading Fluke AirChec

 

 

 

Fluke Networks LinkRunner Duo

Features:

  • 10/100/1000 Link/Ping Speed
  • POTS/ISDN/Ethernet Detection
  • Cable Wiremap
  • Discovery Protocols: CDP/EDP/LLDP
  • Intellitone Digital Toning
  • PoE Verification
  • 10 IP Addresses Configurable Ping List
  • 802.11x Authentication
  • 8 Link Status Reports
  • USB Application Port

LinkRunner Duo Tests:

  • 10/100 Copper
  • Gig Copper
  • Fiber (via SFP)

The Fluke Networks LinkRunner Duo is a frontline tool to establish links at Gigabit speeds. That means frontline technicians now have the power to troubleshoot Gigabit link problems before they’re escalated to higher levels, giving network engineers more time to focus on optimization, planning, and expansion.

The Fluke Networks LRDUO LinkRunnerDuo not only will discover the presence of 802.1X, but can also gain authentication on 802.1X networks. Technicians can now solve 802.1X conflicts and get users back up and running fast.

The Fluke Networks LinkRunner-Duo isthe first connectivity tools to support the new IEEE Link Layer Discovery Protocol (LLDP) in addition to the Cisco and Extreme Discovery Protocols (CDP and EDP). That allows technicians to speed problem resolution by precisely locating the nearest switch model, slot, and port.

When no test documentation is available, closing trouble tickets can be a frustrating and time-consuming process. Finger pointing and redundant testing are just a couple of the wastes that occur. The  Fluke Networks LinkRunner Duo eliminate these wastes by generating objective, professional test reports that can be printed or routed electronically.

If you’re selling your Fluke AirChec please fill out form on the right hand side of page.

Selling Fluke Networks LinkRunner We Buy New Used LinkRunne (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks LinkRunner AT-1000 Auto Tester
Fluke Networks LinkRunner AT 1000
LinkRunner AT provides the answers you need to quickly troubleshoot connectivity problems:

  • Where does this cable or jack go?
  • How is this switch port provisioned?
  • Can I negotiate a Gigabit link?
  • Are there 802.1x security conflicts?
  • Are the DHCP and DNS servers working?
  • Can I get enough power from this port?
  • Can I connect to servers and the Internet with IPv4 and IPv6?
  • Can I connect over copper or fiber links?
  • Is this patch cable good?

In seconds, the LinkRunner AutoTest provides these answers and more on a brightly colored display that’s easy to read under desks or outdoors. You can document your test results with two quick keystrokes to prove the job’s done right. With a six hour battery life and rugged design, LinkRunner can work wherever and whenever you need it.

Features:

  • Instant-on operation
    • ready to run your first test in less than three seconds.
  • Get answers fast
    • user-defined AutoTest performs your required set of connectivity tests in seconds, enabling you to accurately and quickly identify and solve network problems.
  • Verify connection at 10/100/1G over copper or 100/1G over fiber
    • connect using copper or fiber, turn it on to see link status, connection type, signal strength and traffic.
  • Nearest switch and VLAN information
    • uses IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco® and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot and port
  • TruePower™ PoE testing
    • quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery before installing cameras, AP’s and phones ensures smooth deployment.
  • 802.1x authentication
    • verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner Manager software configures 802.1x EAP type, downloads certificates and enters passwords.
  • Cable verification and toning
    • check patch cables using the built-in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, opens or split pairs. The optional office locator kit allows identification of up to six unique ports for documenting cable plants.
  • IPv4/IPv6 ready
    • supports both IPv4 and IPv6
  • Key device and application availability
    • instead of a ping, which is often blocked or disabled, LinkRunner performs a TCP port open test to verify application connectivity using IPv4 and IPv6. Router, DNS and DHCP servers are reported
  • Document results
    • store up to 50 complete test results and download to your PC with the push of a button.
  • Designed for field use
    • six-hour Li-ion battery life, one-handed operation and a rugged design.
  • Easy upgrades
    • the mini-USB port allows software upgrades in the field in minutes.

Functions:

Graphical Cable Wiremap and Cable Details
Finds opens, shorts, mis-wires and split pairs on non-terminated cable with a WireView Cable Identifier and built-in wiremap port.

Cable Tests
Locate cable runs with toning, port advertisement, link blinking and wiremapping with up to six cable identifiers. Toning supports both analog and digital IntelliTone™ modes

Switch Information
LinkRunner AT displays critical nearest switch information including:

  • Switch name and model
  • IP address
  • Port, slot and VLAN
  • Duplex and speed (actual and advertised)
  • Signal strength
  • Connection MDI or MDI/X
  • PoE voltage and power (actual and test limits)
  • Graphical representation of power on pairs

TruePower™ PoE Loading
Verify you are receiving the required current and voltage up to 25.5W to power your PoE enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that your PoE enabled devices will have the required power to function.

AutoTest
Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical network tests in profiles to run every time. Tests include:

  • PoE (copper only) class
  • Link speed and duplex (actual and advertised)
  • RX pair and polarity
  • 802.1x authentication
  • Switch name, port, VLAN, model and IP
  • DHCP auto-negotiation with subnet and DHCP server addresses
  • IPv4 and IPv6 availability
  • Ping and TCP port connectivity with lost and min, max and average speed

Ping and TCP Port Connectivity
Verify connectivity to key devices with ping and TCP connectivity testing. Devices automatically include a router, DNS server and DHCP server. Configure 10 additional devices to meet your requirements by URL or IPv4/ IPv6 address and optional application port number.

Buying, Selling, Trading Fluke Networks LinkRunner

If you’re selling your Fluke Networks LinkRunner please fill out form on the right hand side of page.

Selling Fluke Networks LinkRunner We Buy New Used LinkRunne (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks LinkRunner /a> AT-2000 Auto Tester

LinkRunner AT Provides the answers you need to quickly troubleshoot connectivity problems:

  • Where does this cable or jack go?
  • How is this switch port provisioned?
  • Can I negotiate a Gigabit link?
  • Are there 802.1x security conflicts?
  • Are the DHCP and DNS servers working?
  • Can I get enough power from this port?
  • Can I connect to servers and the Internet with IPv4 and IPv6?
  • Can I connect over copper or fiber links?
  • Is this patch cable good?

In seconds, the LinkRunner AutoTest provides these answers and more on a brightly colored display that’s easy to read under desks or outdoors. You can document your test results with two quick keystrokes to prove the job’s done right. With a six hour battery life and rugged design, LinkRunner can work wherever and whenever you need it.

Linkrunner AT Features:

  • Instant-on Operation
    • Ready to run your first test in less than three seconds
  • Get answers fast
    • User-defined AutoTest performs your required set of connectivity tests in seconds, enabling you to accurately and quickly identify and solve network problems
  • Verify connection at 10/100/1G over copper or 100/1G over fiber
    • Connect using copper or fiber, turn it on to see link status, connection type, signal stength and traffic.
  • Nearest switch and VLAN information
    • Uses IEEE Link Layer Discovery Prtocol (LLDP) Plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot and port.
  • TruePower PoE Testing
    • Quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery before installing cameras, AP’s and phones ensures smooth deployment.
  • 802.1x Authentication
    • Verify access to secure networks using 802.1x and MAC access Control Lists (ACL).
  • Cable verification and toning
    • Check patch cables using the built-in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, opens or split pairs.
  • IPv4/IPv6 Ready
    • Supports both IPv4 and IPv6
  • Key device and application availability
    • Instead of a ping, which is often blocked or disabled, LinkRunner performs a TCP Port open test to verify application connectivity using IPv4 and IPv6. Router, DNS and DHCP Servers are reported.
  • Document results
    • Store up to 50 complete test results and download to your PC with the push of a button.
  • Designed for field use
    • Six-hour Li-ion battery life, one-handed operation and a rugged design.
  • Easy Upgrades
    • The mini-USB Port allows software upgrades in the field in minutes.

Functions:

Graphical Cable Wiremap and Cable Details
Finds opens, shorts, mis-wires and split pairs on non-terminated cable with a WireView Cable Identifier and built-in wiremap port.

Cable Tests
Locate cable runs with toning, port advertisement, link blinking and wiremapping with up to six cable identifiers. Toning supports both analog and digital IntelliTone™ modes.

Switch Information
LinkRunner AT displays critical nearest switch information including:

  • Switch name and model
  • IP address
  • Port, slot and VLAN
  • Duplex and speed (actual and advertised)
  • Signal strength
  • Connection MDI or MID/X
  • PoE voltage and power (actual and test limits)
  • Graphical representation of power on pairs

TruePower PoE Loading
Verify you are receiving the required curent and voltage up to 25.5W to power your PoE enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that your PoE enable devices will have the required power to function.

AutoTest
Verify Enterprise connectivity in seconds with AutoTest. Standardize your set of critical netowrk tests in profiles to run every time. Tests include:

  • PoE (Copper Only) Class
  • Link speed and duplex (actual and advertised)
  • RX pair and polarity
  • 802.1x authentication
  • Switch name, port, VLAN, model and IP
  • DHCP Auto-negotiation with subnet and DHCP server addresses
  • IPv4 and IPv6 availability
  • Ping and TCP port connectivity with lost and min, max and average speed

Ping and TCP Port Connectivity
Verify connectivity to key devices with ping and TCP connectivity testing. Devices automatically include a router, DNS server and DHCP server. Configure 10 additional devices to meet your requirements by URL or IPv4/IPv6 address and optional application port number.

Reflector
The LinkRunner packet reflector mode allows it to be used as a remote device during throughput tests to validate LAN and WAN throughput capabilities. LinkRunner AT supports packet reflection for:

  • OptiView XG Network Analysis Tablet
  • OneTouch AT Network Assistant
  • EtherScope Network Assistant
  • MetroScope Service Provider Assitant

Buying, Selling, Trading Fluke Networks LinkRunner

If you’re selling your Fluke Networks LinkRunner please fill out form on the right hand side of page.

Selling Fluke Networks LinkRunner We Buy New Used LinkRunner (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks LinkRunner MicroScanner Test Kit

Fluke Networks LinkRunner Network Multimeter

At a Glance :

  • Link : Determine whether the drop is active, identify its speed, duplex capabilities and service type-10/100/1000 Mbps.
  • Ping : Verify connectivity to key devices.
  • Cable verification : Multiple tests help you quickly determine if cable is the problem.
  • Cable identification : Document unmarked segments, saving you hours of troubleshooting time.
  • Improved efficiency : Speed up the escalation process by identifying physical or link layer problems.

 

Product Capabilities :

  • An essential, personal tool to quickly verify network connectivity and availability.
  • As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window.
  • As a result, nearly 80% of network problems stem from simple wiring and connection problems.
  • Front-line technicians are the first line of defense against problems in the physical and link layers of the network.
  • LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.

Buying, Selling, Trading Fluke Networks LinkRunner

Fluke Microtest MicroScanner 10/100 Cable Verifier

Product Capabilities

“The essential all-in-one network tester”

The Microscanner TDR checks length, wiremap, continuity, opens, shorts and crossed and split pairs.It also generates multiple tones for use with a cable tracer. The optional office identifier kit is used when patch panel prots or wall jacks are unmarked.

The Microscanner Toner function allows to generate tones to locate hidden cables in walls, ceilings; or identify one in a bundle. An optional probe such as our Intellitone or equivalent is required to detect the tones.

Specifications:

Power Source

  • Battery: 9-Volt alkaline battery
  • Low battery: Low battery indication on display

Environmental

  • Operating Temperature: 0° to 50° C (32° to 122° F)
  • Storage Temperature: -10° to 55° C (14° to 131° F)
  • Humidity: 10 to 90% non-condensing User Interface
  • Display: Custom LCD, 1.75” x .85”
  • Keypad: 4 button keypad

Applications

  • Shielded and Unshielded Twisted Pair cable

Test Interface

  • Main: Modular 8 connector for length, wire map, office identifier, toner
  • Loopback: Modular 8 connector used for patch cable wire map

Length

  • Measures length on all 4 pairs and displays in feet or meters Checks for opens, shorts and connections to a HUB (10BaseT / Token Ring)
  • Maximum length: 1500 ft. (457m)
  • Resolution: 1 ft.

Length Calibration

  • Modes:
    • User Selectable NVP
    • NVP Calculation based on known cable length:
      • Minimum length: 50 ft. (15 m)
      • Maximum length: 1500 ft. (457m)

Wiremap

  • Wiremap checks end-to-end continuity on all four wire pairs (Wiremap adapter required)

Faults detected:

  • Opens
  • Shorts
  • Reversed pairs
  • Swapped pairs
  • Split pairs
  • Distance Maximum length: 656 ft. (200 m)

Office Identifier
Identify cable links from the wiring closet to the office using the optional Office Identifier plugs

  • 12 passive test plugs attached to far end (identified as 1 through 12)
  • Requires minimum 12/36 or 36/45 pairs in cable
  • Distance Maximum length: 656 ft. (200 m)

Toner
Generate audible frequency tones detectable by standard tracer probes

  • Frequency: User may select 1 of 4 predefined tone sequences
  • Interface: Main Mod8 port for tone generation on all 4 pairs. Ground jack provided for grounding MICROSCANNER during trace operations.

High Voltage Input/Protection:

  • The test interface withstands input hazard conditions that arise from normal telephone interfaces (48 VDC at less than 80 mA) or 24 VAC power used to power many telephone keysets.

 

Includes:

  • Fluke Networks LinkRunner Network Multimeter
  • Fluke Microtest MicroScanner 10/100 Cable Verifier
  • Fluke Networks Intellitone Pro 100 Probe
  • Fluke Networks TS19 Butt Set
  • Fluke Networks LinkRunner WireMap
  • (6) RJ45 To Male Coax Cable Identifiers
  • (2) RJ45 to Female Coax Cable Identifier
  • Microscanner WireMap Adapter
  • (2) Cat6 Patch Cables
  • User Manual On CD-ROM
  • Carrying Case

If you’re selling your Fluke Networks LinkRunner please fill out form on the right hand side of page.

Selling Fluke Networks LinkRunner We Buy New Used LinkRunner (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks LinkRunner Network Multimeter

At a Glance :

  • Link : Determine whether the drop is active, identify its speed, duplex capabilities and service type-10/100 Mbps.
  • Ping : Verify connectivity to key devices.
  • Cable verification : Multiple tests help you quickly determine if cable is the problem.
  • Cable identification : Document unmarked segments, saving you hours of troubleshooting time.
  • Improved efficiency : Speed up the escalation process by identifying physical or link layer problems.

Buying, Selling, Trading Fluke Networks LinkRunner

 

Product Capabilities :

  • An essential, personal tool to quickly verify network connectivity and availability.
  • As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window.
  • As a result, nearly 80% of network problems stem from simple wiring and connection problems.
  • Front-line technicians are the first line of defense against problems in the physical and link layers of the network.
  • LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.

If you’re selling your Fluke Networks LinkRunner please fill out form on the right hand side of page.

Selling Fluke Networks LinkRunner We Buy New Used LinkRunner (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks LinkRunner Network Multimeter NEW

At a Glance :

* Link : Determine whether the drop is active, identify its speed, duplex capabilities and service type-10/100 Mbps.
* Ping : Verify connectivity to key devices.
* Cable verification : Multiple tests help you quickly determine if cable is the problem.
* Cable identification : Document unmarked segments, saving you hours of troubleshooting time.
* Improved efficiency : Speed up the escalation process by identifying physical or link layer problems.

Buying, Selling, Trading Fluke Networks LinkRunner

Product Capabilities :

* An essential, personal tool to quickly verify network connectivity and availability.
* As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window.
* As a result, nearly 80% of network problems stem from simple wiring and connection problems.
* Front-line technicians are the first line of defense against problems in the physical and link layers of the network.
* LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.
If you’re selling your Fluke Networks LinkRunner please fill out form on the right hand side of page.

Selling Fluke Networks LinkRunner We Buy New Used LinkRunner (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks LinkRunner Pro Network Multimeter

  • Link at 10/100/Gig – identify device capabilities and confirm actual connected speed/duplex status
  • Ping key devices – measure response statistics of DHCP, default router, DNS server, and other key devices or URLs
  • Verify 802.1X settings – authenticate on 802.1X secured networks; enter EAP type, user name, certificates, and password
  • Detect PoE service – verify availability, voltage level, and pairs of Power over Ethernet per IEEE 802.3af specifications
  • Identify port (C/E/LLDP) – identify nearest switch address, slot, and port with Cisco, Extreme, and IEEE Link Layer Discovery Protocols
  • Test cable wiremap – test wiremap and length; detect miswires, shorts, split pairs or opens; measure distance to faults with TDR
  • Locate and ID cable – use IntelliTone digital toning, hub blink feature, or optional cable IDs to locate cables at patch panels or wall jacks
  • Document test results – save link, ping, PoE, security, and cable test results in unit and upload to PC with USB cable

 

Empower frontline technicians with more problem solving capabilities
Following in the tradition of the original LinkRunner, LinkRunner Pro was designed to provide desktop support and network technicians with a simple, dedicated tool for resolving the most common PC user and device connectivity issues.

Because of rapid network evolution, today’s connectivity problems are much more complex than they used to be. Higher bandwidth requirements have expedited Gigabit proliferation. Greater security threats have necessitated tighter control measures like 802.1X. And technologies like VoIP and WLAN have given rise to a greater reliance on PoE for power. LinkRunner Pro recognizes these changes, and empowers technicians to address today’s new challenges.

Buying, Selling, Trading Fluke Networks LinkRunner

Expedite trouble ticket resolution with professional link status reports
When no test documentation is available, closing trouble tickets can be a frustrating and time-consuming process. Finger pointing among different groups and redundant testing are just a couple of the wastes that occur. With today’s focus on operational efficiency, IT departments don’t have time for wastes like these. LinkRunner Pro can eliminate finger pointing and reduce redundant testing by generating objective, professional link status reports that can be printed or routed electronically.

If you’re selling your Fluke Networks LinkRunner please fill out form on the right hand side of page.

Selling Fluke Networks LinkRunner We Buy New Used LinkRunner (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks LinkRunner Network Multimeter Set

AT A GLANCE :

* Link – Determine whether the drop is active, identify its speed, duplex capabilities and service type. 10/100/1000 Mbps
* Ping – Verify connectivity to key devices.
* Cable verification – Multiple tests help you quickly determine if cable is the problem.
* Cable identification – Document unmarked segments, saving you hours of troubleshooting time.
* Improved efficiency – Speed up the escalation process by identifying physical or link layer problems.

PRODUCT CAPABILITIES :

An essential, personal tool to quickly verify network connectivity and availability
As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window. As a result, nearly 80% of network problems stem from simple wiring and connection problems.

Front-line technicians are the first line of defense against problems in the physical and link layers of the network. LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.

Buying, Selling, Trading Fluke Networks LinkRunner

INCLUDES :
* Fluke Networks LinkRunner Network Multimeter
* LinkRunner Cable Identifiers 1 – 8
* LinkRunner Wiremap Identifier
* Fluke Networks MicroProbe
* LinkRunner Holster
* Carrying Case
* Spare 9v Battery
* Manual On CD-ROM
* Hard Copy Manual for MicroProbe
* RJ-45 to 8 AlligatorClip Test Lead Set
If you’re selling your Fluke Networks LinkRunner please fill out form on the right hand side of page.