Selling Fluke AirCheck We Buy New Used AirCheck (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks CableIQ LinkRunner CIQ-SVC Kit

CableIQ Qualification Tester

At a Glance

Qualifies – Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
Troubleshoots – shows why existing cabling cannot support the network’s bandwidth requirement (e.g. crosstalk at 11 meters)
Discovers – detects what’s at the end of any cable and displays device configuration (speed/duplex/pairing)
Identifies unused switch ports that can be reallocated
Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
Tests all copper cabling media: twisted-pair, coax, and audio cabling

Product Capabilities

The network tech’s vision into cabling bandwidth
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

Reduce escalated problems by as much as 30%
CableIQ’s powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

LinkRunner

AT A GLANCE :

Link – Determine whether the drop is active, identify its speed, duplex capabilities and service type. 10/100/1000 Mbps
Ping – Verify connectivity to key devices.
Cable verification – Multiple tests help you quickly determine if cable is the problem.
Cable identification – Document unmarked segments, saving you hours of troubleshooting time.
Improved efficiency – Speed up the escalation process by identifying physical or link layer problems.
PRODUCT CAPABILITIES :

An essential, personal tool to quickly verify network connectivity and availability
As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window. As a result, nearly 80% of network problems stem from simple wiring and connection problems.

Front-line technicians are the first line of defense against problems in the physical and link layers of the network. LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.

Buying, Selling, Trading Fluke Networks CableIQ

IntelliTone Pro 200 Probe

Main Features

IntelliTone 200 Probe locates and isolates hidden or bundled voice data and video cables quickly and reliably even on active networks

Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliTone™ Probe’s signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes’ work.

IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.

If you’re selling your Fluke Networks CableIQ please fill out form on the right hand side of page.

Selling Fluke Networks ACK-LRPRO We Buy New Used ACK-LRPRO (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks ACK-LRPRO AirCheck & LinkRunner Pro

AirCheck™ Wi-Fi Tester
Wireless troubleshooting made simple in a dedicated handheld tool.
Dedicated, handheld 802.11 a/b/g/n wireless network tester with instant-on technology
One-button AutoTest quickly provides a pass/fail indication of the wireless environment and identifies common problems
See wireless network utilization by channel and quickly determine if it is 802.11 traffic or non-802.11 interference
Quickly identify and locate wireless access points whether authorized or rogue
Fully document your troubleshooting session enabling fast trouble ticket resolution or escalation

Wi-Fi is a complex technology, but testing it doesn’t have to be. The AirCheck Wi-Fi tester allows network technicians to quickly verify and troubleshoot 802.11 a/b/g/n networks.

Designed specifically for dispatched troubleshooting, AirCheck simplifies wireless testing by providing:
A one-button AutoTest, which quickly provides a pass/fail indication of the wireless environment and identifies common problems – for any level of Wi-Fi technician’s expertise
An instant view to required test results including network availability, connectivity, utilization, security settings, rogue hunting, and interference detection
A rugged, purpose-built Wi-Fi tester that’s easy to use and easy to carry
Its intuitive design makes it simple for anyone to quickly master AirCheck. Instant power-up, automated testing, and quick access to more detailed information, lets you close trouble tickets faster – making technicians and users alike more productive. Easily manage test results and documentation using AirCheck Manager software. From start to finish, AirCheck helps take the guesswork out of everyday wireless troubleshooting.

Easy To Use
Instant-on operation – Powers up in less than three seconds and automatically starts discovering networks, access points (APs), and channel activity.
Get answers fast – The one-button AutoTest quickly provides a pass/fail indication of the wireless environment and identifies common problems – for any level of Wi-Fi technician’s expertise.
Identifies security settings for each Network and Access Point: Open, WEP, WPA, WPA2, and/or 802.1x.
Pinpoints Wi-Fi traffic and interference – Shows how much of each channel’s bandwidth is consumed by 802.11 traffic and interference, and the APs using each channel.
Finds rogue APs – Flags unauthorized APs and clients. Helps you hunt them down with the LOCATE function or find them even faster with the optional directional antenna.
Supports 802.11a/b/g/n All in one handheld tool.

Buying, Selling, Trading Fluke Networks ACK-LRPRO

AutoTest
Performs three essential Wi-Fi tests and a pass/fail indication of the wireless environment and identifies common problems – for any level of technician’s expertise.
Air Quality – Checks for Wi-Fi and non Wi-Fi utilization by channel, plus co-channel interference.
Network Quality – Verify coverage, interference, security and ability to connect to specified networks
Rogue Access Points – Identify AP’s not listed in the profile
AutoTests are user configurable and based on the multiple profiles which can be stored in AirCheck and selected for different sites or requirements. Results may also be stored for export to AirCheck Manager.

If you’re selling your Fluke Networks ACK-LRPRO please fill out form on the right hand side of page.

Selling Fluke Networks AirCheck We Buy New Used AirCheck (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks AirCheck Wi-Fi Network Tester
AirCheck™ Wi-Fi Tester
Wireless troubleshooting made simple in a dedicated handheld tool.

  • Dedicated, handheld 802.11 a/b/g/n wireless network tester with instant-on technology
  • One-button AutoTest quickly provides a pass/fail indication of the wireless environment and identifies common problems
  • See wireless network utilization by channel and quickly determine if it is 802.11 traffic or non-802.11 interference
  • Quickly identify and locate wireless access points whether authorized or rogue
  • Fully document your troubleshooting session enabling fast trouble ticket resolution or escalation

Wi-Fi is a complex technology, but testing it doesn’t have to be. The AirCheck Wi-Fi tester allows network technicians to quickly verify and troubleshoot 802.11 a/b/g/n networks.

Designed specifically for dispatched troubleshooting, AirCheck simplifies wireless testing by providing:

  • A one-button AutoTest, which quickly provides a pass/fail indication of the wireless environment and identifies common problems – for any level of Wi-Fi technician’s expertise
  • An instant view to required test results including network availability, connectivity, utilization, security settings, rogue hunting, and interference detection
  • A rugged, purpose-built Wi-Fi tester that’s easy to use and easy to carry

Its intuitive design makes it simple for anyone to quickly master AirCheck. Instant power-up, automated testing, and quick access to more detailed information, lets you close trouble tickets faster – making technicians and users alike more productive. Easily manage test results and documentation using AirCheck Manager software. From start to finish, AirCheck helps take the guesswork out of everyday wireless troubleshooting.

Buying, Selling, Trading Fluke Networks AirCheck

Easy To Use

  • Instant-on operation – Powers up in less than three seconds and automatically starts discovering networks, access points (APs), and channel activity.
  • Get answers fast – The one-button AutoTest quickly provides a pass/fail indication of the wireless environment and identifies common problems – for any level of Wi-Fi technician’s expertise.
  • Identifies security settings for each Network and Access Point: Open, WEP, WPA, WPA2, and/or 802.1x.
  • Pinpoints Wi-Fi traffic and interference – Shows how much of each channel’s bandwidth is consumed by 802.11 traffic and interference, and the APs using each channel.
  • Finds rogue APs – Flags unauthorized APs and clients. Helps you hunt them down with the LOCATE function or find them even faster with the optional directional antenna.
  • Supports 802.11a/b/g/n All in one handheld tool.

AutoTest
Performs three essential Wi-Fi tests and a pass/fail indication of the wireless environment and identifies common problems – for any level of technician’s expertise.

  • Air Quality – Checks for Wi-Fi and non Wi-Fi utilization by channel, plus co-channel interference.
  • Network Quality – Verify coverage, interference, security and ability to connect to specified networks
  • Rogue Access Points – Identify AP’s not listed in the profile

AutoTests are user configurable and based on the multiple profiles which can be stored in AirCheck and selected for different sites or requirements. Results may also be stored for export to AirCheck Manager.

If you’re selling your Fluke Networks AirCheck please fill out form on the right hand side of page.

Selling Fluke Networks 682 – We Buy New Used 682 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks 682 LANMeter Cat5e Network Analyzer

Fluke 682 Enterprise LANMeter

The first and only portable troubleshooting tools specifically designed to help network managers see across routers to view events on managed networks

The Fluke LANMeter series of handheld testers now makes testing and troubleshooting complicated networks faster and easier than ever before.

Modern Tools for Modern Networks

Today’s diverse super-segmented WANs are loaded with managed hubs, switches, and routers, all scattered over remote sites, making it almost impossible to “see” where problems are originating. Unlike protocol analyzers the Enterprise LANMeter gives managers of these modern networks the fast answers they need.

Ease of Use

From the moment you pick it up, you will find the LANMeter’s front panel simple, straightforward and fast to use. Five dynamically labeled soft function keys put you in control of the intuitive menu system, and status LED indicators reflect the most common local segment problems. It also contains an extensive context sensitive help file system.

New Device Verification

Minimize installation problems by using the LANMeter to verify correct operation of network interface cards, cabling and hubs or MAUs before they have a chance to impact network operation. Verify connectivity and access to key network resources through LAN and WAN connections with protocol-specific ping tests.

Buying, Selling, Trading Fluke Networks 682

Quick Problem Isolation

The unique functionality of the LANMeter series allows you to quickly isolate the most common problems that occur on an Ethernet or Token Ring network. The Fluke LANMeter is the only single instrument in a handheld package capable of pinpointing network, component and cable problems.

Distributed Testing

The Enterprise LANMeter provides more flexibility in solving network problems by combining portability with remote access and control. With the WebRemote Control Option for Enterprise LANMeter, you can take full control of a 68x Enterprise LANMeter via a Netscape or Microsoft web browser anywhere on the network. No more running back and forth to the physical location of an intermittent problem hoping to be there when the problem occurs again. Just place the LANMeter near the source of the problem, point your web browser to the IP address of the LANMeter and monitor the situation from your office.

TCP / IP

Fluke has substantially enhanced support for today’s growing TCP/ IP networks. TCP/IP has rapidly become the most important network protocol for many enterprise- wide networks. The Enterprise LANMeter provides features designed to show key IP network configuration information that is necessary to troubleshoot connectivity and configuration problems in IP networks. In addition, Enterprise LANMeter can use SNMP commands to retrieve configuration and status information, such as route table and bridge forward table, to further facilitate quick diagnostic of network problems in switched or routed environment.

SNMP

The Enterprise LANMeter is the first portable tool to include SNMP-based troubleshooting capabilities, in an easy-to-use format to reach beyond the attached LAN segment. The unique capability to query via SNMP (including MIB I, II and RMON queries) allows access to information that already exists in managed devices throughout the entire network.

Support You Can Count On The LANMeter analyzer’s Flash ROM Technology protects your investment by allowing quick and easy software updates from your PC. If anything should go wrong, you can count on Fluke’s worldwide service and support to get you up and running fast.

Ethernet
HUB Autotest Tests new or suspected faulty hub and switch ports for correct operation by testing for the presence and polarity of link pulses, offered auto negotiation capabilities and for hub transmit levels. Protocols detected are identified, and selected local IP hosts and IPX servers are queried to ensure connectivity. Cable tests are performed when a cable fault is suspected.

Wire Map
Checks for miswires and for intermediate opens and shorts on twisted pair cable. A pin-by-pin connection list is displayed.

Cable Identifier

Used to map UTP drop and lobe cables to individual offices from the wiring closet. Unique Cable Identifier Remote Units are identified and displayed in the order detected. Up to thirteen identifiers can be connected.

If you’re selling your Fluke Networks 682 please fill out form on the right hand side of page.

Selling Fluke Networks 672 – We Buy New Used 672 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks 672 LANMeter Cat5e Network Analyzer

Troubleshoots and manages 10/100 Ethernet and Token Ring networks
Frame relay, ISDN and T1/E1 troubleshooting
Direct connectivity to test 100BASE-TX networks
A large range of enhancement options for full network vision
Auto-negotiate sensing capabilities Product Capabilities
The isolated nature of a switched network can be a nightmare for Network Engineers who are responsible for troubleshooting problems in these environments.

The Enterprise LANMeter Series provides you with troubleshooting and management capabilities for 10/100 Ethernet and Token Ring networks. With the SwitchWizard» and WideAreaWizard» options you can browse switch, router and other SNMP statistics in a graphical user friendly manner. You can also dig into frame relay, ISDN and T1/E1 configurations to check utilization and connectivity problems.

The new WebRemote Control Option lets you access the power of the Enterprise LANMeter regardless of where you are. Web access capability, which allows you to view troubleshooting and analysis information using your web browser, comes standard on LANMeter instruments with version 8.52 or higher. For existing 68X Enterprise LANMeter users, download the latest software version to get a 30-day trial of the WebRemote Control Option.

For 672, 675, 682 and 685 users, enhancement kits are available to allow you to convert your existing LANMeter product to a 683 or 686 Enterprise LANMeter capable of direct connection to Fast Ethernet networks. Additionally, our Priority Support Gold Members automatically receive a 20% discount on these enhancements.

Buying, Selling, Trading Fluke Networks 672

Plummeting per-port costs for Fast Ethernet hubs and user demands for higher bandwidth to the desktop are forcing many networks to adopt 100BASE-TX as the technology of choice for growth and for replacement of aging hardware. To support this trend, Fluke added direct connectivity for 100BASE-TX to the already popular Enterprise LANMeter series test tools.

Includes:
Fluke Networks 672 LANMeter
Fluke LANMeter Wiremap Adapter
Fluke LANMeter Cable Ideantifiers 1-6
Cat5e Patch Cable
AC Adapter/Charger
Power Cord
RS-232 PC Interface Cable
User Manual On CD-ROM
Hard Copy User Manual
Soft Carrying Case

If you’re selling your Fluke Networks 672 please fill out form on the right hand side of page.

Selling Fluke Networks 670 – We Buy New Used 670 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks 670 Service Assistant Gig

Fluke 670 Token Ring LANMeter

The Fluke 670 defines a new product category of token-ring installation and network maintenance tools. The hand-held, battery operated Fluke 670 Speeds problem isolation by diagnosing the most common media and Token-Ring network problems through its analyzer-like features.

Buying, Selling, Trading Fluke Networks 670

 

The Fluke 670 is one of the only product that offers, in a single instrument, the capability to isolate cable, componenet and network problems. Not only does the 670 perform all the usual cable scan tests, including checking for a short or open cable with distance to the fault, but it also adds basic error, network and protocol statistics.

If you’re selling your Fluke Networks 670 please fill out form on the right hand side of page.

Selling Fluke 8160– We Buy New Used 8160 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 8160 Microtest COMPAS Network Device

COMPAS is a network troubleshooting tool for LAN Administrators, network technicians and service providers who respond to LAN trouble calls. Attach COMPAS to a fileserver, workstation, hub or wallplate and compas self-configures to the connection. In just seconds, COMPAS selects and runs the test to solve the problem. And, because COMPAS is completely portable, you can quickly resolve problems right at the problem site.Microtest offers a COMPAS Handheld troubleshooter.

Buying, Selling, Trading Fluke 8160

The COMPAS performs such tests as duplicate IP address detection, IP ping, IP host summary list and detail, Internet control message protocol (ICMP), monitoring and trace route, domain name system (DNS) support for simplified troubleshooting and DHCP (dynamic host configuration protocol) support for automatic configuration.

 

FEATURES:

  • Identifies all network devices in under 10 seconds;
  • Locates defective hubs, NICs, and cables;
  • Identifies network segments;
  • Offers handheld portability;
  • Finds top error sources;
  • Identifies live/dead wall jacks;
  • Monitors network traffic;
  • Runs IP diagnostics;
  • Identifies all available NetWare and Microsoft networks

If you’re selling your Fluke 8160 please fill out form on the right hand side of page.

Selling Fluke 8160-30 – We Buy New Used 8160-30 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 8160-30 Microtest COMPAS Network Device

COMPAS is a network troubleshooting tool for LAN Administrators, network technicians and service providers who respond to LAN trouble calls. Attach COMPAS to a fileserver, workstation, hub or wallplate and compas self-configures to the connection. In just seconds, COMPAS selects and runs the test to solve the problem. And, because COMPAS is completely portable, you can quickly resolve problems right at the problem site.Microtest offers a COMPAS Handheld troubleshooter.

The COMPAS performs such tests as duplicate IP address detection, IP ping, IP host summary list and detail, Internet control message protocol (ICMP), monitoring and trace route, domain name system (DNS) support for simplified troubleshooting and DHCP (dynamic host configuration protocol) support for automatic configuration.
Buying, Selling, Trading Fluke 8160-30

FEATURES:

Identifies all network devices in under 10 seconds;
Locates defective hubs, NICs, and cables;
Identifies network segments;
Offers handheld portability;
Finds top error sources;
Identifies live/dead wall jacks;
Monitors network traffic;
Runs IP diagnostics;
Identifies all available NetWare and Microsoft networks

If you’re selling your Fluke 8160-30 please fill out form on the right hand side of page.

Selling Fluke Metroscope EtherScope We Buy New Used EtherScope (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Metroscope EtherScope Scope Series II w/ Options

Overview
The handheld EtherScope Network Assistant simplifies network testing to make network installat on, validation and troubleshooting easy and fast.

  • Analyze twisted pair, and fiber optic and wireless LANs
  • Diagnosis LAN health automatically with one click
  • Identify root cause with guided troubleshooting
  • Observe connectivity processes
  • Monitor local traffic, switch interfaces and protocols
  • Discover and map devices, networks and VLANs
  • Measure and assess Ethernet LAN/WAN link performance and SLA compliance
  • Validate the availability and responsiveness of LAN services
  • Secure the network from internal threats

 

Network professionals rely on the EtherScope Network Assistant to complete their daily tasks fast. The purpose-built EtherScope speeds and simplifies network installation, validation and troubleshooting by integrating essential tests, automated diagnostics and guided troubleshooting.

  • Install and integrate wired and wireless network infrastructure easily by testing, verifying and fixing configuration issues during deployment. EtherScope helps you get the job done right the first time.
  • Validate network performance and service delivery by measuring key performance attributes and the availability and responsiveness of essential resources. Use EtherScope to document the delivery of services and applications as an element of your network acceptance practice.
  • Troubleshoot problems fast in real-time when they occur, and proactively before they become costly. EtherScope guides you to the root cause so you can close trouble tickets fast without escalation. Audit the performance of the network on a regular, periodic basis to identify and correct emerging issues.

 

Features

Wired and wireless network assistant
The EtherScope is ready for your wired and wireless network. It provides a comprehensive view of your network from both sides of the access point, so you can get the information you need to get your job done fast. The EtherScope is equally at home on twisted pair, fiber optic or wireless networks and features a comprehensive set of tools appropriate for each environment.

Turns anyone into an instant problem solver
The Health Audit test provides visual diagnostics of LAN health with one click. Touch one button to initiate automated measurement and assessment of critical network resources, including the physical layer, infrastructure devices, key services, and protocols. Identify root cause with guided troubleshooting.

Characterizes complex circuits fast
The ProVision™ test measures the critical performance parameters of throughput, frame loss, delay, and jitter, but goes beyond the basics to offer asymmetric testing, multiple streams, easy operation, easy-to-read results and a 4X minimum improvement in testing speed. More relevant than RFC 2544 testing for Metro Ethernet circuit turn-up and SLA validation, both Carriers and private network operators find ProVision valuable.

Verifies delivery of services and applications
The Service Performance Tool verifies that essential network services and applications are available and responsive. Visual pass/fail indicators facilitate quick and easy results analysis at a glance. Incorporate service delivery reports into your LAN validation practice as proof of acceptable network operation.

Ready for demanding field use
Easy to use and carry, the EtherScope is compact and rugged for harsh environments. Featuring a bright, color touch screen, an intuitive user interface and on-board help, the EtherScope is ready to assist you when it is time for action.

 

Buying, Selling, Trading Fluke Metroscope EtherScope

EtherScope Series II Network Assistant Specifications

General specifications  
Weight, with battery 0.86 kg (1.9 lb)
Dimensions 19.1 x 15.2 x 4.4 cm (7.5 x 6.0 x 1.75 in)
Display LCD touch screen, 640 x 480 pixels, TFT (active) color panel, touch pad
LED indicators 6 (including power LED)
Power  
Battery Lithium Ion 7.2V DC (nominal), 4.2Ah, removable/rechargeable
Battery life 4 hour typical, 10 hour in standby mode
External AC adapter/battery charger AC input: 90 to 264 V ac, 48 to 62 Hz; 1.5 A, DC output: 15 V dc, 1.2 A (isolated output)
Auto Charger 12V “cigarette lighter” charger with 6 foot (1.8 m) fully extended coiled cord and LED power indication
Ports  
Communication and accessory ports 1 USB, 1 PCMCIA/Cardbus (PC Card type II), 1 SFP cage, 1 CompactFlash (Card Type I/II), 1 DB-9 serial, headphone jack, microphone jack, Kensington lock receptacle
RJ-45 / Copper Port RJ-45 10/100/1000BASE-T Ethernet
Fiber Port Small Form-factor Pluggable (SFP) in accordance with MSA
Supported SFP Modules 1000BASE-LX, SX, ZX, BX, 100BASE-FX
SFP Connector Duplex LC
Environmental and safety  
Operating temperature 0° to +50°C (32° to 122°F) with up to 95% relative humidity
Battery charging temperature 10° to +40°C (50° to 104°F) with up to 95% relative humidity
Storage temperature -20° to +60°C (-4° to 140°F)
Shock and vibration Meets requirements of MIL-PRF-28800F for Class 3 equipment
Safety CSA Canada and United States, CE, FCC Part 15 Class A, C-TICK N10140; UL and CSA approvals for universal AC adapter, EMC Complies with EN61326, Class A, Criteria C
Wireless LAN Adapter Card  
Specification compliance IEEE 802.11a, 11b, 11g
Certifications FCC part 15, Telec, CTICK, ETSI, EN301893, EN60950
Interoperability WECA Compliant
Interface 32-bit Cardbus
Outdoor operating range Up to 515 m (1690 ft)
Indoor operating range Up to 85 m (279 ft)
Data rate 802.11a: up to 54 Mbps, 802.11b: up to 11 Mbps, 802.11g: up to 54 Mbps
Output power 18 dBm peak power
Infrastructure mode BSS
External antenna connector jack Hirose MS-147
Wireless LAN Directional Antenna  
Frequency range 2.4 – 2.5 and 4.9 -5.9 GHz
Minimum gain 5.0 dBi in the 2.4 GHz band and 7.0 dBi in the 5 GHz band
External antenna connector plug Hirose MS-147

If you’re selling your Fluke Metroscope EtherScope please fill out form on the right hand side of page.